Step 16
Fit hinges to the door ensuring that the part of the hinge which has a cut out is
fitted to the door.
Step 21
Check door opening at bottom and make sure that the distance at the top is the same.
11
Moving
Panel
Hinge plate with notch
Fixed Panel
Step 17
The side of the hinge that has the fixing bolts must be to the inside of the moving
panel. Hinge should be fitted in centre of cutout for maximum adjustment later.
Fully tighten bolts.
Gap top and bottom
should be width of
moving panel +12mm
12
Step 18
Tip
：
Use MDF tool for squaring hinges
Step 19
Remove back plates from hinges on fixed panel side.
Step 20
The moving panel is fitted from inside the enclosure so make sure all hinge parts
and tools are placed inside before the door is lifted into place.
the moving panel
INSIDE
Step 15
Using 4mm hex key fully tighten bracket to glass.
