Insert wall plugs
8mm
Wall Bracket
7A
7B
6mm
Drill 6mm diameter hole
6mm
7C
7D
Keep high side of
bracket facing outside
Step 7
Step 8
Keeping beveled
face to inside
Fit the assembled track into the end brackets and slide on cover caps.
8A
8B
8C
Insert caps to
both ends.
7
8
Step 9
Top
250mm
Bottom
275mm
THIS WAY UP
Hinged fixed panel
Step 10
Push on wall profile completley ensuring end is flush with the top of the
glass panel.
Before assembling the brackets make sure panels are orientated the correct
way. Measure hole centres from top and bottom to determine correct orientation
of panel.
Note the differences between the hinged fixed panel (has notch cuts for hinge)
and the side fixed panel (no notch cuts)'
THIS WAY UP
side panel
Top
250mm
Bottom
275mm
10A
10B
Add a dab of silicone to the
back of the wall bracket and
fix with 4x30 screws.
Position brackets 8mm inwards from edge of tray Mark wall through slot. Drill
6mm diameter hole centre of slot and fix bracket both sides.
