Step 6
INSIDE
7
8
INSIDE
Insert wall plugs
Drill holes for hinge
8mm
MG8x51PLUG
Remove both fixed panels and the bottom track, then drill holes with 8mm
diameter masonry bit and insert wall plugs. Ensure the wall plugs are flush with
the tile.
Step 8
INSIDE
Screw 5
×
65
MGVC45
Step 9
Fix the wall brackets loosely making sure to have the wall bracket in the center
of the hole in the glass.
IMPORTANT !
This is critical as it is where the panel adjusts. If the brackets are
not positioned in the center adjustment will be affected.
Lift the assembled panels into the track. Plumb each panel and mark the centre
of each slot
.
A.
Place the assembled bottom track back on the
tray and place fixed panel into the track. Fix wall
brackets.
Do not fully tighten, leave enough slack for
adjustment. Secure the top bracket first.
B.
Hold glass panel and gently tap profile back
tight against wall using MDF tool provided,
working from bottom to top.
Step 7
