2
GB
Overview
A
B
C
F
E
D
G
H
D. Rinse Hold button
This function interrupts the cycle so that the laundry is left
soaking in water before the spin cycle.
This function is extremely useful because it stops delicate or
synthetic fabrics from creasing (for example when one has
to wait several hours before removing the laundry load).
It should be used only with the programmes for synthetic
fabrics and woollens.
IMPORTANT:
Before opening the door, drain away the water
by setting knob
A
on "drain". To carry out the spin cycle,
simply press
D
.
E. Button for the cycle at 90°C
The strongest standard cycle is at 60°C. To start the wash
cycle at 90°C, you must turn knob
A
to the 60°C setting
and then press this button.
This feature can only be used
with wash cycles 1 and 2 for washing very strong materials,
like cotton, linen and hemp and should be used when the
clothes are very dirty.
F. ON-OFF button
This button turns your appliance ON/OFF. Press button
F
to
turn on the washer-dryer and depress button
F
to turn off
the washer-dryer.
G. ON/OFF Indicator light
When this is lit, the machine is on.
H. Door Lock indicator light
This shows that the door is locked.
Wait at least three minutes after the light turns off (about 3
minutes after the end of the wash programme) before
opening the door.
A. Programme selector
Use this dial to select one of the 18 wash programmes
available for all your laundry requirements (see programme
table on page 6).
Remember that this dial should be turned in a clockwise
direction and only when the machine is off.
B. Dry programme selector
This knob allows you to select the most appropriate drying
cycle for the type of fabric. Two separate cycles are available:
up to 120 min. for fast fabrics
(left sector)
up to 80 min. for synthetic fabrics
(right sector)
The cycle for fast fabrics has a cooling period at the end of
the cycle itself.
C. Detergent
dispenser
The detergent dispenser has
three compartments marked
1
,
2
and
3
:
1
prewash detergent
2
wash detergent
3
fabric softener.
1
2
3
