Battery of the remote control:
The batteries in the remote have an extremely long life.
If the transmission range decreases, the batteries must be replaced. Batteries are not covered by the warranty.
Replacing battery (CR2032):
REPLACE BATTERIES IN REMOTES
12
VD
C
Pb
Cd
Hg
To prevent SERIOUS INJURY OR DEATH: observe the following instructions for the battery
- NEVER allow small children near batteries.
- If battery is swallowed, immediately notify doctor.
- Danger of explosion if battery is replaced improperly.
- Replacement only by identical or equivalent type.
- Dispose of old battery properly. Batteries should not be treated as household waste. All consumers
are required by law to dispose of batteries properly at the designated collection points.
- Never recharge batteries that are not meant to be recharged.
- Do not short-circuit batteries or take them apart.
- If necessary, clean contacts on batteries and contacts
before loading.
- Never expose batteries to excessive heat such as sunshine, fire or the like!
.A D7B>357 43FF7DK 8AD ' ABF;A@3> D7?AF7 5A@FDA> FD3@E?;FF7DE ' ' GE7 3
E5D7I6D;H7D 4>367 FA BDK AB7@ F:7 53E7 3E E:AI@ #@E7DF 43FF7DK BAE;F;H7 E;67 GB
To replace battery for optional remote control transmitter E950M, turn remote control around and open
the case with a screwdriver. Lift cover and lift control board below. Slide battery to one side and
remove. Observe polarity of battery!
Assemble again with a new battery in reverse process.
or
Carefully
Remove Battery
(CR2032 x 1)
