withdrawn
instructions
note
:
in the disconnected
position, the breaker cannot be
removed from its stationary
assembly and can be padlocked
or locked in this position
(see page 18)
to remove it, proceed as follows :
[I]
remove the racking lever from
its storage position and insert it
into the mechanism
[II
Caution : push indexing
lever down before operating the
handle.
Position
2
is shown
[!]
put the racking lever in the
upright position
[II
remove the breaker
connecting
instructions
note :
check that the mechanism
is in the withdrawn position
2
[I]
install the breaker
m
push indexing lever down
before operating the handle.
Position
3
is shown. Put the
'
racking lever in its storage position
4
www
. ElectricalPartManuals
. com
