20
4.5 Replacement of motors
WARNING!
Before opening the table base casing, disconnect the power supply.
WARNING!
Before removing gas springs, ensure that the piston rod is locked or the spring is
unloaded.
4.5.1 Removal/mounting of height adjustment motor
•
Loosen table base casing screws (see section 4.3.3 page
•
Remove upper bellows end (see section 4.3.4 page 15).
•
Remove column casings (see section 4.3.5 page 16).
•
Remove support plate (3).
•
Remove top of motor (see section 4.3.6 page 16).
•
Remove the lock ring (1) from the bottom of the motor and
remove the joint pin (2).
•
Disconnect the motor from the control unit.
•
Transfer the support tubing (4) to the new motor.
4.5.2 Removal/mounting of back section adjustment motor
•
Disconnect the motor from the control unit (3).
•
Remove lock rings (1)
•
Hold the back section in place and remove joint
pins (2).
!
!
3
4
2
1
o1
04
6i
.p
df
2
o1
04
6p
.p
df
1
1
2
3
o1046x.pdf
Summary of Contents for PRACTICO
Page 31: ...31 NOTES vaara Meri...
Page 32: ......
