FORM NO. 1060‐145_rev
F
Meritool LLC
6
WARNING – Keep all body parts and foreign objects outside of cartridge holder at all times. Fingers
can be injured if caught between piston and cartridge holder.
6. Starting and Stopping (Figure 4):
Pull Variable Speed Power Trigger ‐ Figure 1 ‐ No. 7 (pulling trigger more will increase speed). Adjust Variable
Speed Power Trigger to achieve desired maximum speed. To stop flow and relieve pressure, release Variable
Speed Power Trigger. When dispensing is completed, release Variable Speed Power Trigger, pull Clutch Trigger,
and pull Rack fully back. Remove cartridge or sausage.
NOTE –
To minimize the chance of damage to the cartridge or sausage, the dispenser automatically adjusts its
output force. You may experience a variation in motor speed associated with this function. If damage or blowby
occur, adjust the speed control to a lower setting.
WARNING –
To reduce risk of injury, always unplug the Charger and remove the Battery from the Charger
or the tool before performing any maintenance. Never disassemble the tool Battery or Charger. Contact a
PowerPush® Service facility for all repairs. The Battery must be removed from the tool before disposal. All
batteries shall be disposed of safely in accordance with local laws and regulations.
1.
Always unplug Charger before cleaning and when it is not in use.
2.
Frequent maintenance can prolong the life and safety of the tool. Every year or as necessary (depending on
usage of tool), return it to a service center shown in the service center section of this manual for:
● Electrical and mechanical inspec on
● Cleaning and lubrica on
● Tes ng to ensure that the electrical and mechanical systems are in proper opera on.
3.
If the POWERPUSH® 5000 is not running at full capacity, check to be sure that the Battery is fully
charged and that the contacts on the Battery and tool are both clean. If they require maintenance, use
caution and clean with an eraser. If your tool is still not operating properly, return all parts including tool,
Battery and Charger to a service center shown in the Service Center section of this manual for repair.
Service
or maintenance performed by unqualified personnel could result in injury or damage.
MAINTENANCE
