FORM NO. 1060‐145_rev
F
Meritool LLC
5
1. Remove and Install Battery Pack (See Figure 2):
To remove Battery, squeeze both release buttons and slide the Battery forward.
To insert Battery, slide Battery fully onto the base of the handle.
Figure 2
2. Install Rack:
Remove Battery, depress Clutch Trigger; insert Rack from rear of tool by wiggling and easing it into position. Do
not power the Rack into the tool, as damage may occur. Depress Clutch Trigger Push Rack forward until Piston
(See Install Piston Instruction Below) engages the cartridge or sausage.
Figure 3
3. Install Cartridge Holder or Sausage Barrel:
Line up the Cartridge Holder or Sausage Barrel over Rack. Hold Quick Thread End Cap securely and screw
Cartridge Holder or Sausage Barrel into Quick Thread End Cap fully.
4. Install Piston:
Push Rack forward and slide Piston over it. Insert and tighten #2 Phillips screw into Piston.
5. Dispense Material:
Install Cartridge or Sausage Material into the tool, install Battery, and begin dispensing.
OPERATION
