COPYRIGHT © 2008 MERIT ENTERTAINMENT
PM0590-15 MEGATOUCH ION 2009 EDITION 2
HARD DRIVE
OSD BOARD
SECURITY KEY
HARD DRIVE
ADAPTER
SCREW SECURING
HARD DRIVE
TO MOUNTING PLATE
FIGURE 1 - EVO, EVO WALLETTE, AND ELITE EDGE
WITH CPU SECTION OPEN
rest on the hard drive adapter, holding
it in place when screwed in tightly. If
you are
not
installing a security key,
skip to step 11.
9.
Locate the security key (the button-
shaped disc with the handle) on the
OSD board (see Figure 1).
10. Remove the existing security key from
the OSD board by sliding it out of place.
Slide the new security key into place.
11. Close and lock the CPU section.
12. Remove the three Allen screws secur-
ing the marquee cover using a 1/16”
Allen wrench. Replace the existing
marquee with the supplied marquee
and re-secure the cover.
13. Plug in and turn on the game. The game
will reboot twice to configure the hard-
ware. When prompted, perform a touch-
screen calibration.
14. If you are connected to TournaMAXX
or TournaCHAMP, you must re-enter the
dial-in settings after completing the soft-
ware upgrade. After entering the set-
tings, make the initial call into the server,
and then perform two
Updates From
Server
. Refer to the MegaNet manual
for information on how to perform these
functions.
