COPYRIGHT © 2004 MERIT INDUSTRIES, INC.
FIGURE 1 - BLUE MAXX/MAXX CLASSIC - HOOD ASSEMBLY
FAN POWER
CONNECTOR
CLEAR
DRAINAGE
TUBING
SPRING-LOADED
LEVER
GROUND
STRAP
ATTENTION:
OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DEVICES
Removal/Installation of Touchscreen -
Blue MAXX/MAXX Classic Countertop
Troubleshooting Information - Removal/Installation of Touchscreen -
Blue MAXX/MAXX Classic Countertop
Megatouch FORCE Technical Reference Manual
7. After replacing the front bezel, install the lid on the chassis, connecting the fan power connec-
tor, monitor control board, ground strap, and plastic drain tube. Then pull the lid towards you
until the spring-loaded levers lock into place. See Figures 1 and 2 for locations.
8. Close and lock the lid.
9. Plug in and turn on the game.
10. When the game is finshed booting, calibrate the touchscreen.
11. Replace and lock the coin box or coin box/bill acceptor assembly.
