P r o g r a m m i n g
7
• Enter one of the following codes using the numeric keypad to
indicate the type of product you want to control.
The indicator should flash once each time you press a key, and then
flash twice and stay off when you have entered the code correctly:
Product type
Code
Product type
Code
TV
1000
SAT/CABLE
6000
VCR
2000
LD
7000
TAPE/MD/CD-R
4000
DVD
8000
CD
5000
GAME
9000
For example, for a TV enter 1000.
• Point the MSR+ at the product you want to control, hold down
Function
, and press
OFF
.
Each time you press
Function OFF
the MSR+ will step to the next
device in the library and send the corresponding
Power off
code to
the other product.
• As soon as the other product turns off, indicating that this is the
correct device, press the same source key again (eg
TV
) to store the
currently selected device.
• To step back through the device library if you overshoot press
Mute
on the MSR+.
The indicator will flash twice to indicate that the operation has
succeeded, and the MSR+ is now ready to control your other
product.
Problems when programming automatically
If you reach the end of the device library without finding one that
switches off your product the indicator will flash six times.
• Press the source key again to resume the search from the beginning.
If the other product does not turn off, your product may not be
supported by the device library. In this case you will need to
program the MSR+ using your product’s own remote control as
described in
Learning commands, page 8.
Note:
When stepping through the device library, you can use
the keys other than
Function OFF
on the MSR+ to test other
commands in the currently selected device.
G Series MSR 7
7/7/03, 3:16:27 pm