4
U s i n g
The MSR+ provides 12 source keys to allow you to select one of
the sources in your system.
To select a source
• Press the appropriate source key.
The indicator will flash once to indicate that the command has
been sent.
Your Meridian controller will select that source. In addition, the
MSR+ keys will change so that they control that source.
To use your MSR+ to control a source without selecting the source
on your Meridian system:
• Hold down
Function
and press the source key.
For example, to change the TV channel while listening to a CD
press
Function TV
, and then use the numeric keys to select the
channel.
To use the function options
The function options are shown in blue on each key.
• Hold down
Function
, in the lower left corner of the remote.
• Press the key corresponding to the function you want to select.
To control your other equipment
The nine source keys:
AUX
,
DISC
,
TAPE
,
TV
,
CABLE
,
SAT
,
VCR1
,
VCR2
, and
GAME
can be programmed to control other equipment
in your system as described in
Programming your MSR+, page 5.
The
CD
,
RADIO
, and
DVD
source keys are dedicated to controlling
Meridian products and cannot be changed.
The volume keys,
Mute
, and
OFF
also always control Meridian
products. To use these commands with other equipment hold down
Function
with them.
To illuminate the MSR+ in low light conditions
• Press any key. Use
Function
to avoid sending a command.
The backlight will stay on for about five seconds.
Controlling sources
G Series MSR 4
7/7/03, 3:16:26 pm
