Page 16
7.0 Product Part Numbers
The table below lists the various part numbers and description that are available for this
series of product.
Product Part Number Guide
Part Number
Matching Part #
Video
channel
Fiber
Interface
Optical
Connector
FT-2W2D/2D-2
FR-2W2D/2D-2
2
Multimode
ST
FT-2W2D/2D-5
FR-2W2D/2D-5
2
Singlemode
FC
FT-2W2D/2D-5ST
FR-2W2D/2D-5ST
2
Singlemode
ST
FT-4W2D/2D-2
FR-4W2D/2D-2
4
Multimode
ST
FT-4W2D/2D-5
FR-4W2D/2D-5
4
Singlemode
FC
FT-4W2D/2D-5ST
FR-4W2D/2D-5ST
4
Singlemode
ST
Note: This FT & FR series cards are not compatible with the other 1-slot ST & SR
cards.
8.0 Troubleshooting
Below is a listing of several problems that may arise during the installation & operation of
the modules. If you are having difficulty installing or operating the modules please refer
to this list below.
Problem:
Module does not fit in chassis slots
Action:
Check module orientation. Meridian “Globe” must be oriented on the top left
hand side of the module. Make sure the card guides in the chassis are aligned
with the extrusion on the module.
Problem:
Card power LED does not light when power to the module/subrack is
applied or power indicator turns on and off
Action:
Check power supply to ensure that it is plugged in and turned on. If flashing
continues, move module to another chassis or location in the same chassis, if
available.
Problem:
No video at output of module
Action:
Check the SpectraView display on the monitor for an indication of what the
problem may be. Also, check to ensure that the video channel-specific LEDs are
on (Green). Also, check to ensure that the optical LEDs are ON. If no video is
