8
Assembly Steps
Attention:
1. Put the washers to the two ends of the bolts.
2. For pre-assembly, put the bolts and screws are in the position, and tighten them with spanner
after the full assembly.
3. Some parts are put in the machines already.
4.Suggest to assembly it by at least two persons.
Picture 1
1.
Put the main bottom frame(#1) side with 3pcs holes in the upper, attach the weight guide
tube( #5) to the main frame(#1), using 2pcs hex bolts M10x20
（
#73
）
.
2.
Attach main bottom frame(#1) and front bottom frame(#2), using 2pcs M10x25 hex bolts
（
#65
），
4pcs flat washers
Φ
10
（
#56
）和
2pcs M10 nuts
（
#75
）
.
3.
Tighten all the bolts by spanner, put weight plate cushion (#32) through the weight guide tube
(#5).
