13
Using the 808.2
Signature Reference
CD Player
Programming a selection
You can programme a selection of tracks and then play
only the tracks you have programmed.
You can programme a selection either by storing the
tracks you want to play, or by clearing the tracks you
do not want to play. If you programme a selection by
storing the tracks you want to hear, you can play the
tracks in any order and repeat tracks in the sequence.
You can programme a selection while the disc is
playing, in which case the selection will be played after
the current track finishes.
To choose a track to programme
Press
[
or
]
(front panel or remote) to step
through the track numbers until the track you want is
displayed, or type the number of the track you want.
To make a selection by adding tracks
Choose the first track you want to play, as described
above.
The display will show the track number.
For example:
Track 14
Press
Store
(remote or under the front panel).
The track will change from
Track
to
Store
, and all the
other tracks will be marked
Clear
.
For example:
Store 14
You should store the first track for a selection within
two seconds, or it will begin to play.
•
•
•
To make a selection by omitting tracks
Choose one of the tracks you do not want to play, as
described above.
The display will show the track number.
For example:
Track 12
Press
Clear
(remote or under the front panel).
The track will change from
Track
to
Clear
, and all the
other tracks will be marked
Store
.
For example:
Clear 12
You should clear the first track for a selection within
two seconds, or it will begin to play.
To add or remove a track from a
selection
Select the track using
[
or
]
(front panel or
remote).
Alternatively you can enter the track number using the
remote.
Press
Store
to add the track, or
Clear
to remove
the track.
To clear a programme
Press
*
(front panel or remote) twice.
The display will show:
Clear Program
A programme is automatically cleared if you open the
disc drawer, or press
Off
.
•
•
•
•
•
