Configuring the multimedia controller using a computer
43
Advanced
Specify the
Advanced
options as follows:
●
If the source is connected to another Meridian unit, set
Comms type
to
1C
for a Meridian CD player,
2C
for a
Meridian FM tuner, and
3C
for a Meridian DVD player.
Otherwise set it to
None
.
●
If you have two Meridian source units of the same type you
can configure them to have different Comms addresses. You
can then select the appropriate source by specifying its
Comms address in the
Comms address
field.
●
Select
Triggers 1
and/or
2
to switch the corresponding trigger
output on when the source is selected.
Trigger 1
is usually selected for all sources, to switch on a
power amplifier, and
Trigger 2
is usually selected for video
sources, to switch a TV.
Each video input option can be set to
Last valid
to leave the
video loop unchanged when you select the source. You would
usually do this for audio-only sources, such as
CD
:
Summary of Contents for 562V.2
