Meridian Yachts 391SB Sedan, Owner'S Manual

Page: 86 / 100

Chapter 11: Electrical Systems 391 Sedan • Owner’s Manual
80
•
Your yacht is equipped with two (2) 110-volt/30-amp shore power inlets or one (1) 220-volt/50-amp shore
power inlet.
•
The 110-volt/30-amp shore power inlets provide 110-volt/30-amp power to each shore power master breaker.
•
The 220-volt/50-amp shore power inlet provides 110-volt/50-amp power to each shore power master breaker.
•
Dual shore power inlets are labeled LINE 1 and LINE 2, which corresponds to the SHORE POWER 1 and
SHORE POWER 2 master breakers on the 110-volt AC master panel.
•
LINE 1 and LINE 2 are independent of each other except when the parallel switch is used.
Connecting to Shore Power
1. Review all hazard
information at the
beginning of this sec-
tion, Shore Power.
2. Turn Off all breakers
and switches on the
110-volt AC master
panel.
3. Attach the shore power
cord(s) to the yacht
inlet(s) first, then to the
dockside outlet(s).
4. Switch the SHORE
POWER 1 and/or
SHORE POWER 2
master breakers On.
5. As needed, turn On the individual component breakers on the 110-volt AC master panel.
Shore Power Cable Hoist (If Equipped)
•
The shore power cable hoist allows you to easily feed out and reel in the shore power cable.
•
Before using the shore power cable hoist, read the cable hoist manual.
SHOCK and ELECTRICAL SYSTEM DAMAGE HAZARD!
•
Monitor the polarity indicator lights EVERY TIME you connect to shore power.
•
If a reversed polarity light turns on when you are connecting to shore power, do NOT turn
on the main breaker switches.
•
Instead, IMMEDIATELY unplug the shore power cord (ALWAYS from the dockside outlet
first) and alert marina management.
WARNI N G! !
TYPICAL SHORE
POWER INLET(S)