MERIDA USERS MANUAL
Page 21
•
The fourth LED (figure 31, D) indicates the battery is less
than 20% charged or near empty.
Caution: The unit is approaching automatic motor
shut off.
•
The fifth LED (figure 31, E) indicates 0 or empty. The bat-
tery is fully discharged and must be charged. When this
LED is on, power to the motor is automatically shut off.
Turn the key to “OFF” immediately. A warning beep
sounds continuously until the key is turned OFF.
For NiMH Batteries:
•
The first LED (figure 31, A) (counting from the top) indi-
cates full charge. The battery is 75% to 100% charged
when this LED is on.
•
The second LED (figure 31, B) indicates the battery is
30% to 50% charged.
•
The third LED (figure 31, C) indicates the battery is 10%
to 30% charged.
Caution: The unit is approaching automatic motor
shut off.
•
The fourth LED (figure 31, D) indicates the battery is near
empty.
•
The fifth LED (figure 31, E) indicates 0 or empty. The bat-
tery is fully discharged and must be charged. When this
LED is on, power to the motor is automatically shut off.
Turn the key to “OFF” immediately. A warning beep
sounds continuously until the key is turned OFF.
NOTE:
The amount of time it takes for the lights to change
varies considerably from one ride to the next due to:
Rider weight, tire pressure, terrain, wind speed, wind
direction, temperature, road surface, gears used, etc.
It is advisable to return home before the third LED
lights up. Keep track of the time it takes for you to
complete various rides. After many rides you will have
a better understanding of how the lights relate to
battery run time.
6h. BATTERY PACK INSTALLATION AND
REMOVAL
Caution: The PowerCycle’s™ electronic components
will retain a small bit of energy, even when the battery
has been removed. To avoid electric shock, turn the
Battery Key Switch to the“ON” position to discharge any
remaining energy that may be in the system, before you
attempt to remove the battery. You will hear an audible
beep and the LED string will flash briefly to indicate
discharge.
a. Removing the battery pack
Figure 33
Figure 34A
1. Stabilize the bike using its support stand.
2. Press the key into the battery pack, and turn the key
counterclockwise to the “OPEN” position (figure 30, D).
Figure 34B
CORRECT
Figure 34C
INCORRECT
Figure 33
A
B
C
D2
Tilt
Forward
Lift From
Frame
D1
E
Summary of Contents for PowerCycle
Page 1: ......
