5. Analog interfaces
5.1 Analog Inputs
The input level can be precisely adjusted on the rear panel of the Sphynx 2. Please note that the setting
potentiometers are delicate and must be operated with care. Only trained personnel should undertake
this work.
Note
that the warranty of the unit does not cover damage to these controls.
Adjusting the Line Input
The Input line level can be adjusted b12 and +30 dBu. In the DADman program system menu
the maximum line level can be set to the range 12 to 21 dBu or 21 to 30 dBu.
Use the back-panel multi-turn adjustment screws in order to fine tune the maximum input level within the
range +12 and +21 dBu, or +21 and +30 dBu.
Turn the adjustment screw clockwise in order to raise the analog input gain or turn the adjustment screw
counter clockwise in order to lower the analog input gain.
AES11 in
WC in
WC out
Video in
Analog in 5
Analog in 1
2
3
4
6
7
8
ANALOG INPUTS
ANALOG LEVEL
ADJUSTMENT SCREWS
Remote
control
RS-422
5.2 Analog output module
Adjusting the Line Output
The analog line output can be adjusted b12
and +27 dBu.
Use the multi-turn adjustment screws on the back panel
in order to adjust the maximum output level.
Turn the adjustment screw clockwise in order to
increase analog output level or turn the adjustment
screw counter clockwise in order to decrease analog
output level.
ANALOG OUTPUT LEVEL
ADJUSTMENT SCREWS
1 / 5
Analog out
2 / 6
3 / 7
4 / 8
15
