10
DUA II User Manual
© 2000 Merging Technologies
SOFTIMAGE®|DS 3.0 with SONY Analog BetaCam Users
This example is based on Digital Studio users who are using the DUA II in conjunction with the Merging Mykerinos
boards and an Analog BetaCam video deck.
Audio
Monitoring/
Headphones
ANALOG
INPUTS
ANALOG
OUTPUTS
MERGING DUA II
Audio Interface
AES-EBU
INPUTS
ADAT
ODI I/O
AES-EBU
OUTPUTS
ANALOG
OUTPUTS
ANALOG
INPUTS
Monitor
Outputs
MYKERINOS
Card
VIDEO / TC
Bracket
SOFTIMAGE|DS
Computer
Video Ref.
Black Burst
Generator
SONY
Analog Betacam
Video Deck
This example uses the following:
•
Analog BetaCam outputs are routed through analog inputs of DUA II to DS input channels 1-4 (ADAT).
•
DS output channels 1-4 (ADAT) are routed through analog outputs of DUA II to the Analog BetaCam inputs.
•
The monitoring is provided by the front panel monitoring selection of DUA II.
•
The Mykerinos card (via VIDEO/TC bracket) and the Video Deck are connected to the Video Ref. generator.
Note that each device should be connected to the video generator with its own cable.
Using the Loop-Through to connect the different devices is not recommended.
•
The DUA II is set to
ODI
sync mode and
AutoDetec SR
mode.
•
The DIP switch 1-8 must be set to:
X – X – X – X – OFF – OFF – OFF – OFF.