TRIM ROD ASSEMBLY KIT
90-8M0118300 eng MARCH 2016
© 2016 Mercury Marine
Page 3 / 4
Description
Nm
lb‑in.
lb‑ft
End cap
61
–
45
3. If the cylinder was removed for disassembly, install the trim cylinder to the pivot pin. Tighten the trim cylinder mounting
screws to the specified torque.
Description
Nm
lb‑in.
lb‑ft
Trim cylinder mounting screws
26
–
19.2
4. Retract the trim cylinder rods.
5. Rotate the trim cylinders to align with the mount cradle. Extend the trim cylinder rods.
6. Install the trim cylinder rod ends to the mount cradle. Refer to the appropriate service manual section for installation.
7. After installing the components, fill and bleed the power trim system with Power Trim and Steering Fluid. Refer to
Check
Fluid and Purge the Power Trim System
in the appropriate service manual.
Tube Ref No.
Description
Where Used
Part No.
114
Power Trim and Steering
Fluid
Power trim system
92-858074K01
