manualshive.com logo in svg

Mercury Tracer 1997, Owner'S Manual

The Mercury Tracer 1997 Owner's Manual is a comprehensive guide for users of this classic vehicle. Packed with useful information, maintenance tips, and troubleshooting advice, this manual is a must-have for every Tracer owner. Download it for free from manualshive.com to ensure a smooth and enjoyable driving experience.

Share
Download
background image

Lights, warning and indicator ......6

air bag .....................................7,64
anti-lock brakes (ABS) ..............9
anti-theft .....................................9
brake ............................................8
charging system ..........................9
checkcoolant .............................10
high beam ...................................9
liftgate ajar ................................10
low fuel ........................................7
oil pressure .................................9
safety belt ...................................8
service engine soon ....................7
turn signal indicator ...................9
upshift indicator .........................8

Load limits .................................101

GVWR ......................................101
trailer towing ..........................102

Lubricant specifications ...........180
Luggage rack .............................106
Manual transaxle .........................99

driving .......................................99
fluid, checking and adding ....134
shifting gears ..........................100

Mirrors

side view mirrors (power) .......16

Motorcraft parts ........................179
National Highway Traffic
Safety Administration ...............186
Parking brake ..............................94

automatic release .....................38
operation ...................................94
warning light ...............................8

Parts (see Motorcraft Parts) ...179
Power door locks ........................31
Power features

door locks ..................................31
windows ....................................34

Power steering

fluid, checking and adding ....139

Rear window

defroster ....................................24

washer .......................................30
wiper ..........................................30

Refill capacities for fluids ........179
Relays ........................................109
Remote control ...........................45
Remote entry system .................45

illuminated entry ......................49
locking/unlocking doors ......46,47
opening the trunk .....................47
panic alarm ...............................49

Repairing paint chips ...............176
Reporting safety defects ..........186
Restraints, safety(see Safety
restraints) ....................................55

head ...........................................54
infant .........................................67

Roadside emergencies ..............107
Safety chains, when towing a
trailer .........................................104
Safety defects, reporting ..........186
Safety restraints ..........................55

adjusting the safety belts .........59
automatic locking mode
(retractor) .................................57
for children ...............................65
lap and shoulder belts ........56,59
maintenance ..............................60
proper use ............................55,56
vehicle sensitive locking
mode ..........................................57
warning light and chime ..8,10,62

Safety seats for children ............67

automatic locking mode
(retractor) .................................81
built-in child seat .....................74
in front seat ..............................68
in rear seat ................................70
tether anchorage hardware .....71

Seats ............................................53

adjusting the seat, manual .......53
child safety seats ......................67
folding rear seats ......................54

Index

189

Summary of Contents for Tracer 1997

































































































































































































Reviews:

No comments

Related manuals for Tracer 1997

cam 2850 Mounting Instructions preview
2850
Brand: cam Pages: 2
Dapper Lighting 575 Install Manual preview
575
Brand: Dapper Lighting Pages: 2
FANATEC Porsche 911 Turbo S Wheel Developer Quick Manual preview
Porsche 911 Turbo S Wheel
Brand: FANATEC Pages: 9
Yakima SideWinder Installation Instructions And Owner'S Manual preview
SideWinder
Brand: Yakima Pages: 8
Quadratec Brute Strength 12057.0271 Installation Manual preview
Brute Strength 12057.0271
Brand: Quadratec Pages: 6
AC Schnitzer X3 M-Technik Fitting Instructions Manual preview
X3 M-Technik
Brand: AC Schnitzer Pages: 20
Skoda OCTAVIA - TECHNICAL CHANGES 11-2009 Owner'S Manual Supplement preview
OCTAVIA - TECHNICAL CHANGES 11-2009
Brand: Skoda Pages: 16
Pacbrake HP10098 Installation Manual preview
HP10098
Brand: Pacbrake Pages: 6
Alphasonik PCP15LDE Owner'S Manual preview
PCP15LDE
Brand: Alphasonik Pages: 8
Aries 2051182 Installation Manual preview
2051182
Brand: Aries Pages: 3
T.J.M. T13 Outback Frontal Protection System Fitting Instructions Manual preview
T13 Outback Frontal Protection System
Brand: T.J.M. Pages: 18
Audi PXDXVW3 Quick Start Manual preview
PXDXVW3
Brand: Audi Pages: 4
Audiovox Rear Observation System Package RVMPKG2 Installation Manual preview
Rear Observation System Package RVMPKG2
Brand: Audiovox Pages: 15
AMP Research BEDXTENDER HD 74805-00A Assembly And Installation Manual preview
BEDXTENDER HD 74805-00A
Brand: AMP Research Pages: 7
AutoMaxi SUPRA 44 Montage preview
SUPRA 44
Brand: AutoMaxi Pages: 2
Hollywood Racks HR4000 Assembly And Instruction Manual preview
HR4000
Brand: Hollywood Racks Pages: 8
CAME UNIPARK ARK1 Manual preview
UNIPARK ARK1
Brand: CAME Pages: 14
Front Runner TBRA020 Quick Start Manual preview
TBRA020
Brand: Front Runner Pages: 7

Brands by name

Popular brands

Load more brands