Mercury SmartCraft SC5000 Operation Manual Download Page 53

Page: 53 / 64

SYSTEM

90-892133 JULY 2003

Page 7-13

Active Alarms

Helm Active Alarms

Alarm Message

(Pop-Up Screen)

Active Alarm

Description

PITOT CKT HI/LO

Pitot sensor circuit problem. Have the sys-

tem checked by your dealer.

PRT COOL OVRHT

The engine has overheated. Refer to the

Engine Operation and Maintenance Manu-
al for information on overheating.

PWR RELAY OUTPUT/BACKFD

Main power relay is not functioning cor-

rectly. Have the engine checked by your

dealer.

SEA TEMP CKT HI/LO

Boat mounted water temperature sensor

circuit problem. Have the system checked

by your dealer.

SYSTEM ALARM

SHIFT POS CKT HI/LO

Shift position sensor circuit problem. Have

the system checked by your dealer.

START SOLENOID

Start solenoid circuit problem. Have the

system checked by your dealer.

TPI ALL ERR
TPI _ DIFF ERR

Throttle position sensor circuit problem.

Have the system checked by your dealer.

TRIM CKT HI/LO

Power trim sensor circuit problem. Have

the system checked by your dealer.

THERMOSTAT FAULT

Failure to reach engine operating temper-

ature. Have the engine checked by your

dealer.

WATER IN FUEL

Water in the engine water-separating fuel

filter reached the full level. Water can be

removed from the filter. Refer to the

En-

gine Operation and Maintenance Manual.0

5 VDC PWR LO

Sensor circuit problem. Have the system

checked by your dealer.

SWITCH ACTIVITY

OIL LVL ENG LO

Oil level is critically low in the engine

mounted oil reservoir tank (2-cycle en-

gines). The engine mounted oil reservoir

tank along with the remote oil tank will

have to be refilled. Refer to the

Engine

Operation and Maintenance Manual.

Summary of Contents for SmartCraft SC5000

































































Search results

Summary of Contents for SmartCraft SC5000

Reviews:

Related manuals for SmartCraft SC5000

Brands by name

Popular brands

Mercury SmartCraft SC5000, Operation Manual

Search results

Summary of Contents for SmartCraft SC5000

Reviews:

Related manuals for SmartCraft SC5000

Brands by name

Popular brands