M u l t i m e d i a
M u l t i m e d i a
Grasp the edge or bracket of
the card, align your card with
an empty AGP expansion slot
and slide it into place.
Plug the monitor cable into
your card. Then turn on the
computer and monitor.
4.
6.
Replace the screw to fasten
the card in place, and replace
the computer cover.
5.
Installing AGP Card Enhanced Drivers
Windows "New Hardware Found"
New hardware will be detected after you restart your computer.
Windows 95/ 98/ Me may launch the "Update Device Driver
Wizard" to install the Standard VGA Driver. If it does, follow the
step-by-step instructions below to allow Windows to correctly
identify your new hardware.
Click
Next
.
Click
Finish
.
Insert your Windows CD into your CD-ROM drive.
Click
OK
.
Type the following:
D:\WIN95 or D:\WIN98 or D:\WINME
(If D is not your CD-ROM drive, substitute D with the correct
drive letter.)
Click
OK
.
Click
Yes
to restart your computer.
1.
2.
3.
4.
5.
6.
7.
8.
To install the Display Driver for Windows 95/ 98/ Me
With Windows 95/ 98/ Me running on your computer, you need to
install the display driver to take advantage of the higher perfor-
mance, resolutions, and special graphic features.
Insert the Mercury Set-up CD into your CD-ROM drive.
If Windows runs the CD automatically, proceed to step 6.
Click
Start
.
Select
Run
.
Click
Browse
.
1.
2.
3.
4.
R
You are now ready to install the display driver. Proceed to install
the display driver, and follow the step-by-step instructions to
complete the installation.
R
R
4
5
