24
Motherboard User’s Guide
Primary Graphics Adapter
This item indicates if the primary graphics adapter uses the PCI or the AGP bus.
The default AGP setting still lets the onboard display work and allows the use of
a second display card installed in an PCI slot.
Allocate IRQ to PCI VGA
If this item is enabled, an IRQ will be assigned to the PCI VGA graphics system.
You set this value to No to free up an IRQ.
PCI IDE BusMaster
This item enables or disables the DMA under DOS mode. We recommend you to
leave this item at the default value.
PCI / Plug and Play Setup Page
This page sets up some parameters for devices installed on the PCI bus and
those utilizing the system plug and play capability.
CMOS SETUP UTILITY – Copyright (C) 1985-2004, American Megatrends, Inc.
PCI / Plug and Play Setup
Primary Graphics Adapter AGP
Allocate IRQ to PCI VGA
Yes
PCI IDE BusMaster
Disabled
Help Item
Option
PCI
AGP
: Move Enter: Select +/-/: Value F10: Save Esc: Exit
F1: General Help F9: Optimized Defaults
Supervisor Password
This item indicates whether a supervisor password has been set. If the password
has been installed,
Installed
displays. If not,
Not Installed
displays.
BIOS Security Features Setup Page
This page helps you install or change a password.
CMOS SETUP UTILITY – Copyright (C) 1985-2004, American Megatrends, Inc.
BIOS Security Features
Security Settings
Supervisor Password : Not Installed
Change Supervisor Password
Press Enter
Password Check
Setup
Help Item
Install or Change the
password.
: Move Enter: Select +/-/: Value F10: Save Esc: Exit
F1: General Help F9: Optimized Defaults
