Mercury Mountaineer 2001, Owner'S Manual

Page: 108 / 280

If you wish to erase your personal code, use the following instructions:
Erasing personal code
1. Enter the factory-set code.
2. Press 1/2 within five seconds of
step 1.
3. Press the 7/8 and 9/0 controls at
the same time within five seconds of
step 2.
The system will now only respond
to the factory-set code.
Unlocking the doors with the keyless entry system
To unlock the driver’s door, enter either the factory-set code or personal
code (each digit pressed within five seconds of the prior digit). The
interior lamps will illuminate.
To unlock all doors, enter the
factory-set code or personal code
(driver door unlocks) and press the
3/4 control within five seconds.
Locking the doors with the keyless entry system
To lock all the doors, press 7/8 and
9/0 at the same time. It is not
necessary to first enter the keypad
code.
Autolock
The autolock feature will lock all of the vehicle doors when:
•
all doors are closed
•
the engine is running and
•
you shift into any gear putting the vehicle in motion
1 2
3 4
5 6 7 8 9 0
1 2 3 4 5 6 7 8
9 0
1 2 3 4 5 6 7 8 9 0
Controls and features
108