IMPORTANT: Trolling motors stored in temperatures below 0 °C (32 °F) should
be operated slowly for a minimum of 15 minutes before going above 30%
operation.
Lubrication Points
NOTE: Preferred lubricants can be obtained at any authorized MotorGuide or
Mercury Marine service center.
To reduce friction and quiet squeaks, lubricate the specified locations
periodically with the following lubricants:
•
Bracket door knob threads ‑ 2‑4‑C with PTFE
•
Latch pin hooks ‑ 2‑4‑C with PTFE
•
Latch pins ‑ 2‑4‑C with PTFE
•
Pivot pins ‑ 4‑Stroke 10W‑30 Outboard Oil
IMPORTANT: Never use an aerosol lubricant to grease or oil any part of the
unit. Many aerosol lubricants contain harmful propellants that can cause
damage to various parts of the trolling motor.
IMPORTANT: Do not allow any lubricant to contact the column sleeves in the
door bracket halves as trolling motor steering tension will be affected.
a -
Latch pin hooks
b -
Pivot pins
c -
Latch pins
d -
Bracket door knob threads
Tube Ref
No.
Description
Where Used
Part No.
95
2-4-C with PTFE
Latch pins, latch pin hooks, and bracket
door knob threads
92-802859A 1
110
4-Stroke 10W-30
Outboard Oil
Pivot pins
92-8M0078625
Battery Inspection
The battery should be inspected at periodic intervals to ensure proper trolling
motor operation.
a
a
b
b
b
b
d
58622
c
c
c
c
MAINTENANCE
26
eng
Summary of Contents for motorguide X5-105
Page 2: ...eng...
