IMPORTANT: A minimum of four mounting bolts are required to mount the
trolling motor to the boat. Spread the mounting bolts as far apart as practical
for the most secure mounting.
58594
Mount bracket mounting holes (5 per side)
3. Drill the mounting holes with a 7 mm (1/4 in.) diameter drill bit. Remove
any debris.
IMPORTANT: Use a larger drill bit to countersink the holes on fiberglass boats
to prevent cracking.
4. Insert the rubber isolators between the base of the mount and the boat
mounting surface. Place the tie‑down strap under the mount bracket,
hook‑and‑loop side down, with the buckle facing toward the outside of the
boat.
a -
Velcro tie‑down strap
b -
Buckle
58597
a
b
TROLLING MOTOR INSTALLATION AND OPERATION
eng
15
Summary of Contents for motorguide X5-105
Page 2: ...eng...
