Mercury MerCruiser Axius 350 MAG, User Manual, Page: 62 / 151

Section 3 - On The Water
Page 54 90-864197084 NOVEMBER 2008
• Tap the joystick in the direction you want to turn. Tapping the joystick left (port) or right (starboard) adjusts your course
by 1° for each movement.
24707
Adjusting the heading to starboard (port opposite)
6. Turn the wheel or press the "AUTO HEADING" button to disengage Auto Heading and a single beep sounds. If the steering
wheel is used to disengage Auto Heading, the resume button LED turns on and a single beep sounds. While the LED is lit,
you can press the "RESUME" button to resume auto heading.
a - Port "TURN" button
b - Starboard "TURN" button
c - "AUTO HEADING" button
d - "RESUME" button
7. If the ERC Handles are moved to neutral, Auto Heading turns off, a single beep sounds, and the "STANDBY" light turns on.
You cannot resume your course by pressing the "RESUME" button.
a - "OFF" button
b - Current heading
c - Drive positions
d - Engine RPM
Pressing the "AUTO HEADING" button causes VesselView to displays the "AUTO HEADING" screen for three seconds. If the
VesselView "AUTO HEADING" screen does not appear, the "AUTO HEADING" screen needs to be activated in VesselView
calibration. Axius CAN still engages whether the screen appears or not.
NOTE: If you press the "AUTO HEADING" button a second time, the Axius CAN goes to Standby mode and all lights other than
"STANDBY" turn off.
RESUME
STANDBY ACTIVE
AUTO
HEADING
TURN TURN
32509
a
b
c
d
31408
b
c
a
d