GASOLINE ENGINE 8.1 S INBOARD MODELS
Page 24 of 58
Engine Installation
NOTICE to INSTALLER
Before Starting Installation read General Information and Installation Require-
ments completely.
Engine Oil Dipstick Location
Engine crankcase oil dipstick can be located on either starboard or port side of engine to
suit installation requirements. Place rubber cap over the dipstick tube that is not being used.
77629
a
a
b
a
a -
Dipstick Tube
b -
Dipstick
Battery Cable Connection
IMPORTANT: Engine electrical system is negative (–) ground.
IMPORTANT: Before connecting battery cables, make sure that grounding stud and
starter solenoid terminal are free of paint or any other material that could cause a
poor electrical connection.
1. Connect negative (BLK) battery cable to grounding stud on flywheel housing and tighten
nut securely.
2. Connect positive (RED) battery cable to 10 mm terminal on starter solenoid and tighten
nut securely.
