IRQ/Event Activity Detect
Scroll to this item and press <Enter> to view the following screen:
CMOS Setup Utility – Copyright (C) 1984 – 2000 Award Software
IRQ/Event Activity Detect
Item Help
VGA
[OFF]
LPT & COM
[LPT/COM]
HDD & FDD
[ON]
PCI
Master
[OFF]
PowerOn by PCI Card
[Enabled]
Wake Up On LAN/Ring
[Disabled]
RTC Alarm Resume
[Disabled]
x Date (of Month)
0
x Resume Time (hh:mm:ss)
0 0 0
IRQs Activity Monitoring
[Press Enter]
Menu Level
↑
↓
→
←
: Move
Enter : Select
+/-/PU/PD:Value:
F10: Save ESC: Exit F1:General Help
F5:Previous
Values
F6:Fail-Safe
Defaults F7:Optimized
Defaults
This item opens a submenu that enables you to set events that will resume
the system from a power saving mode.
VGA (Off)
When set to On, the system power will resume the system from a power sav-
ing mode if there is any VGA activity.
LPT & COM (LPT/COM )
When this item is enabled, the system will restart the power-saving timeout
counters when any activity is detected on the serial ports, or the parallel port.
HDD & FDD (ON)
When this item is enabled, the system will restart the power-saving timeout
counters when any activity is detected on the hard disk drive or the floppy
diskette drive.
PCI Master (OFF)
When set to Off, any PCI device set as the Master will not power on the sys-
tem.
PowerOn by PCI Card (Enabled)
Use this item to enable PCI activity to wakeup the system from a power sav-
ing mode.
Wake Up On LAN/Ring (Disabled)
Use this item to enable LAN or modem activity to wakeup the system from a
power saving mode.
RTC Alarm Resume (Disabled)
When set to Enabled, additional fields become available and you can set the
date (day of the month), hour, minute and second to turn on your system.
When set to 0 (zero) for the day of the month, the alarm will power on your
41
