Mainboard User’s Manual
Expansion Slots
This mainboard has one AGP, one CNR and two 32-bit PCI slots.
AGP1
CNR1
PCI1
PCI2
Follow the steps below to install a AGP/CNR/PCI expansion card.
1. Locate the AGP, CNR or PCI slots on the mainboard.
2. Remove the slot cover for this slot from the system chassis.
3. Insert the expansion card edge connector into the slot and press
it firmly down into it so that it is fully inserted.
4. Secure the expansion card bracket to the system chassis using
the screw that held the slot cover in place.
PCI Slots
You can install 32-bit PCI interface expansion cards in PCI slots.
Slot1 only supports PC5 Slave mode. It is recommended you give
first priority to PCI 1~4 slots while inserting cards.
AGP1
This slot supports the
DVO (Digital Video Output)
function
(without AGP support)
for a TV or video monitor displaying.
CNR Slot
This slot is used to insert CNR (Communications and Networking
Riser) cards including LAN, Modem, and Audio functions.
20
Summary of Contents for KOB 845G NDSMx
Page 4: ...Mainboard User s Manual IV...
