Mercury 92-8M0069603 Operation & Maintenance Manual Download Page 34

Page: 34 / 85

Section 3 - Specifications

Page 26

90-8M0113986

eng

DECEMBER 2015

*Battery manufacturers may rate and test their batteries to different standards. MCA, CCA, Ah, and reserve capacity (RC) are

the ratings recognized by Mercury Marine. Manufacturers that use standards different than these, such as equivalent MCA, do

not meet Mercury Marine battery requirements.

Fluid Specifications

IMPORTANT: All capacities are approximate fluid measures.

Engine

IMPORTANT: Fluid level indicators are calibrated to provide accurate readings with the engine level and installed according to

the manufacturer's instructions. Modifications may affect fluid level readings.
Always use the proper fluid level indicator to determine the exact quantity of oil or fluid required.

Engines with Closed‑Cooling System Oil Cooler

2.0L

System Capacity

Fluid Type

Part Number

Engine oil (with filter)

5.2 L (5.5 US qt)

5W‑30 Full Synthetic TDI Engine Oil

92‑8M0069603

Closed‑cooling system

7.7 L (8.1 US qt)

Extended Life Coolant/Antifreeze – concentrated

92‑8M0070979

Transmission

NOTE: Capacities are for the transmission only and do not include the fluid cooler or fluid cooler hose capacities.

Model

Capacity

Fluid type

Part Number

Technodrive TM 345

1.6 L (1.7 US qt )

Class CD SAE 20 or

Class CD SAE 30 engine oil

Obtain locally

Technodrive TM

485‑A

2.6 L (2.75 US qt )

SAE 20W ‑ 40 or

SAE 15W ‑ 40 engine oil

Obtain locally

Approved Paints

Description

Part Number

Mercury Diesel White

8M0108939

Mercury Light Gray Primer

92‑80287852

Mercury Phantom Black

92‑802878Q1

Summary of Contents for 92-8M0069603






















































































Search results

Summary of Contents for 92-8M0069603

Reviews:

Related manuals for 92-8M0069603

Brands by name

Popular brands

Mercury 92-8M0069603, Operation & Maintenance Manual

Search results

Summary of Contents for 92-8M0069603

Reviews:

Related manuals for 92-8M0069603

Brands by name

Popular brands