65
MAINTENANCE
1
b
c
a
d
e
f
g
2
a
b
f
d
e
c g
Gear Case Lubricant
Checking Gear Case Lubricant / Refilling Gear Case
1
Torquemaster and Sportmaster
2
Fleetmaster
a -
Place outboard in a vertical operating position.
b -
Remove the (upper) vent plug and sealing washer.
c -
Remove the (lower) Fill/Drain plug.
NOTE: Examine the magnetic fill/drain plug for metal particles. A
small amount of metal filings or fine metal particles indicates normal
gear wear. An excessive amount of metal filings or larger particles
(chips) should be checked by an authorized dealer.
d -
Quickly place lubricant tube into the fill hole.
e -
Slowly add lubricant until it flows from the (upper) vent hole.
IMPORTANT: Replace sealing washers if damaged.
f -
Stop adding lubricant. Install the (upper) vent plug and seal-
ing washer before removing the lubricant tube.
g -
Remove lubricant tube and reinstall cleaned (lower) fill/drain
plug and sealing washer.
(continued on next page)
Summary of Contents for 300 - PRO MAX 3.0L
Page 2: ...0 ...
Page 75: ...73 NOTES ...
Page 79: ...77 ok MAINTENANCE LOG Date Maintenance Performed Engine Hours ...