Cargo management system (if
equipped):
Reclip the tools onto the jack.
Reinstall the jack and tools in the cargo area. To replace the jack in the
vehicle,
•
guide the jack bottom first in the
trim opening and position in the
bracket (3),
•
secure the retention clip on the
upper part of the jack (2), and
•
close the thumbscrew (1).
Make sure the jack is fastened so it
does not rattle when you drive.
Non-cargo management system
(if equipped):
•
Reclip the tools onto the jack
making sure that the tools are
fully contained by the clips as
shown.
•
Reinstall the jack in the pocket
with the left side first, then snap
the right side down.
2007 Mariner
(mrn)
Owners Guide (post-2002-fmt)
USA
(fus)
Roadside Emergencies
205
