4. Press the power door unlock control three times.
5. Turn the ignition back to ON.
6. Press the unlock control once. After a five to ten second delay, the
door will lock/unlock to confirm successful programming.
7. Turn the ignition to OFF.
KEYLESS ENTRY SYSTEM
With the keyless entry keypad, you
can:
•
lock or unlock the vehicle doors
without using the key
•
open trunk
•
disable/enable horn chirp
•
disable/enable autolock
See also
Remote entry system
in this chapter for more information.
Your vehicle has a factory-set 5–digit code that operates the keyless
entry system. You can also program your own 5–digit personal entry
code.
The factory-set code is located:
•
on the owner’s wallet card in the glove compartment
•
taped to the computer module
•
or at your dealer
When pressing the controls on the keyless entry keypad, press the
middle of the controls to ensure a good activation.
Programming your own entry code
1. Enter the factory-set code (keypad will illuminate when pressed).
2. Press the 1/2 control within five
seconds of step 1.
3. Enter your personal 5 digit code.
Enter each digit within five seconds
of the previous one.
1 2
3 4
5 6
7 8
9 0
1 2
3 4
5 6
7 8
9 0
Locks and Security
100
