manualshive.com logo in svg

Mercury 1999 Mystique, Owner'S Manual

The 1999 Mercury Mystique Owner's Manual, an essential companion for any proud owner, is now available for free download! Get detailed information, maintenance guides, and troubleshooting tips for your Mystique at manualshive.com. Explore the comprehensive manual to maximize your ownership experience effortlessly.

Share
Download
background image

Driving

120

•

D 

(Overdrive)

Note that the vehicle’s gearshift is
console-mounted on the floor. The
transaxle control switch (TCS) is
located on the gearshift handle.
The transaxle control indicator
light (O/D light) is located on the
instrument panel.

Overdrive is not shown on the
display, but is the default mode for
the D gearshift position. This is the
normal driving mode for the best
fuel economy. The transaxle
operates in gears one through four.
The O/D light is off (not
illuminated) during normal vehicle
operation.

Overdrive can be deactivated by
pressing the transaxle control
switch (TCS) located on the
gearshift handle. The O/D OFF
indicator light will illuminate in the
instrument cluster. 

•

N

(Neutral)

The wheels of the transaxle are not
locked. Your vehicle will roll freely,
even on the slightest incline, unless
the parking brake or brakes are on.

22MDren  4/13/99  3:40 PM  Page 120

Summary of Contents for 1999 Mystique





















































































































































































































































Reviews:

No comments

Related manuals for 1999 Mystique

Roav R5141 Owner'S Manual preview
R5141
Brand: Roav Pages: 10
EUFAB 12015 Manual preview
12015
Brand: EUFAB Pages: 12
B-Speech Sima User Manual preview
Sima
Brand: B-Speech Pages: 4
Cadillac 2007 SRX Owner'S Manual preview
2007 SRX
Brand: Cadillac Pages: 522
Connects2 adaptiv mini ADVM-BM1 Fitting & User Manual preview
adaptiv mini ADVM-BM1
Brand: Connects2 Pages: 4
Buick Electra 225 1965 Service Manual preview
Electra 225 1965
Brand: Buick Pages: 914
Pet Gear TRI-FOLD PG9300RF Instruction Manual preview
TRI-FOLD PG9300RF
Brand: Pet Gear Pages: 4
Cadillac 2011 SRX CROSSOVER Owner'S Manual preview
2011 SRX CROSSOVER
Brand: Cadillac Pages: 416
TIE DOWN LONGRUN 86103 Assembly/Installation Instructions preview
LONGRUN 86103
Brand: TIE DOWN Pages: 2
Ford Mustang 2007 Supplement Manual preview
Mustang 2007
Brand: Ford Pages: 40
Renault CAPTUR 2019 Vehicle Instruction Card preview
CAPTUR 2019
Brand: Renault Pages: 11
Pogo Alert+ Operating Instructions Manual preview
Alert+
Brand: Pogo Pages: 40
Tobe EPS-LD SafePark Technical Data preview
EPS-LD SafePark
Brand: Tobe Pages: 2
EUFAB 16476 Operating Instructions Manual preview
16476
Brand: EUFAB Pages: 18
Mercedes-Benz GLC 2020 Operator'S Manual preview
GLC 2020
Brand: Mercedes-Benz Pages: 66
Waeco MagicWatch MWE150 Installation And Operating Manual preview
MagicWatch MWE150
Brand: Waeco Pages: 176
Navman F-Series B2+ User Manual preview
F-Series B2+
Brand: Navman Pages: 10
Cruiser Consoles BUSHMAN 15L ROADIE fridge Base console Installation Instructions Manual preview
BUSHMAN 15L ROADIE fridge Base console
Brand: Cruiser Consoles Pages: 6

Brands by name

Popular brands

Load more brands