Mercury 1996 Sable Manual Download Page 60

Page: 60 / 391

[SR28550(ALL)04/95]

Pull the shoulder belts out to ensure that the
crotch safety belt buckle is securely fastened
and the retractor is locked. Refer to Figure 8.

[SR28575(ALL)04/95]

half page art:0001455-B

Figure 8: Checking for securely latched buckle and locked
retractor

[SR28600(ALL)04/95]

10. If the belts become too tight, unbuckle the

crotch safety belt buckle allow belts to
retract, then reinsert both belt tongues.

[SR28650(ALL)04/95]

To remove the child from the built-in child
seat:

[SR28700(ALL)04/95]

Squeeze the tabs on the top and bottom of
the chest clip and pull the halves apart to
open the chest clip. Refer back to Figure 7.

[SR28750(ALL)04/95]

Press the release button on the crotch safety
belt buckle.

[SR28800(ALL)04/95]

Slide the shoulder belts off the child’s
shoulders and remove the child. Refer back
to Figure 5.

File:fcsrs.ex

Update:Wed Dec 20 09:34:02 1995

Summary of Contents for 1996 Sable








































































































































































































































































































































































































Search results

Summary of Contents for 1996 Sable

Reviews:

Related manuals for 1996 Sable

Brands by name

Popular brands

Mercury 1996 Sable, Manual

Search results

Summary of Contents for 1996 Sable

Reviews:

Related manuals for 1996 Sable

Brands by name

Popular brands