Mercury 1996 Sable Manual Download Page 348

Page: 348 / 391

321

[SV40850(ALL)11/94]

To install the brakelamp:

[SV40855(ALL)11/94]

Install the bulbs.

[SV40860(ALL)11/94]

Position the brakelamp over the tab slots
and line up the tabs with the tab slots.

[SV40865(ALL)11/94]

Push down and toward the rear window to
engage the tabs.

[SV40870(ALL)11/94]

Push attachment toward the rear window
and line up the slot in the attachment with
the edge of the sheet metal hole.

[SV40875(ALL)11/94]

Release the attachment slot onto the sheet
metal hole.

[SV40878(ALL)02/95]

Replace the package tray trim.

[SV40880(ALL)11/94]

Wagon

[SV40885(ALL)02/95]

one third page art:0001396-A

Parts of the high-mount brakelamp (wagon)

File:fcsvs.ex

Update:Wed Dec 20 09:36:55 1995

Summary of Contents for 1996 Sable








































































































































































































































































































































































































Search results

Summary of Contents for 1996 Sable

Reviews:

Related manuals for 1996 Sable

Brands by name

Popular brands

Mercury 1996 Sable, Manual

Search results

Summary of Contents for 1996 Sable

Reviews:

Related manuals for 1996 Sable

Brands by name

Popular brands