Mercury 1996 Mystique Manual Download Page 100

Page: 100 / 284

Features

[FV10100(ALL)11/93]

7-1/2 pica art:0001188-A

The moon roof

[FV10150(ALL)01/95]

WARNING

Do not let children play with the moon roof. They may
seriously hurt themselves.

[FV10200(ALL)01/95]

Sliding Shade

[FV10300(ALL)01/95]

The moon roof has a sliding shade that you can manually open
or close to block the sun when the glass panel is shut.

[FV10400(ALL)05/95]

To close the sliding shade, pull the shade toward the front of
the vehicle. The shade automatically opens when the moon roof
is opened.

[FV10500(ALL)01/95]

Seats

[FV10525(ALL)04/95]

Head Restraints

[FV10600(ALL)04/95]

If you use them properly, head restraints will help protect your
head and neck in a collision.

[FV10700(ALL)05/95]

A head restraint helps protect you best if you position it behind
your head and not behind your neck.

[FV10750(ALL)05/95]

If your vehicle has the four-way head restraint, you can adjust it
in four directions. You can raise it two (2) inches (50 mm) from
its normal position, or you can move it forward up to 60˚ until
you reach the desired position.

File:cdfvz.ex

Update:Fri Feb 23 11:06:10 1996

Summary of Contents for 1996 Mystique





























































































































































































































































































Search results

Summary of Contents for 1996 Mystique

Reviews:

Related manuals for 1996 Mystique

Brands by name

Popular brands

Mercury 1996 Mystique, Manual

Search results

Summary of Contents for 1996 Mystique

Reviews:

Related manuals for 1996 Mystique

Brands by name

Popular brands