Mercury Security Corporation, Copyright 2005
MR-10/20
Doc. 10107-0000 rev. 1.03 3/05
Page 6
Information subject to change without notice.
7.50 [190]
2.50 [64]
3.60 [91]
1.75 [44]
1.90 [48]
1.10 [28]
3.70 [94]
3.30 [84]
2X Ø .18 [4.5]
15. Reader Mounting Dimensions:
Optional Wall Plate (part# WP-10)
Fitting Rigid Conduit to junction Box
Warranty
Mercury Security Corporation warrants the product is free from defects in material and workmanship under normal use and service with proper maintenance
for two years from the date of factory shipment. Mercury Security Corporation assumes no responsibility for products damaged by improper handling or
installation. This warranty is limited to the repair or replacement of the defective unit.
There are no expressed warranties other than set forth herein. Mercury Security Corporation does not make, nor intends, nor does it authorize any agent
or representative to make any other warranties, or implied warranties, and expressly excludes and disclaims all implied warranties of merchantability or fitness
for a particular purpose.
Returned units are repaired or replaced from a stock of reconditioned units. Returns must be accompanied by a return authorization number (RMA) obtained
from customer service, and prepaid postage and insurance.
Liability
The card readers should only be used to control exits from areas where an alternative method for exit is available. This product is not intended for, nor is
rated for operation in life-critical control applications. Mercury Security Corporation is not liable under any circumstances for loss or damage caused by or
partially caused by the misapplication or malfunction of the product. Mercury Security Corporation's liability does not extend beyond the purchase price of
the product.
Optional HOOD (part# WS-10)
1.00 [25]
DIMENSION: INCH [mm]
MOUNTING HOLE
2X Ø .18 [4.5]
2.60 [66]
3.30 [84]
1.30 [33]
1/2" RIGID
1-GANG
CONDUIT
BOX
W
ALL STUD
2.25 [57]
4.
20
[107
]
WALL OPENING
FOR J-BOX
