INSTALLATION
Check the appliance is electrically safe and gas sound when you have finished.
25
Final Fitting
Fitting the Bottom Panel
Open the left-hand oven door and make sure the storage
drawer is removed.
Note: For safety’s sake make sure the drawer runners are out
of the way.
On the front on the cooker base there are two mounting
plates. Remove the three fixing screws from each plate.
Fit the retaining brackets to the mounting plates and refit the
screws (Fig.7-17). DO NOT tighten at this stage.
Adjust the bottom panel to align it with the door panels.
When it is positioned correctly, use a suitable flat open ended
spanner to tighten the bracket screws, and then tighten the
bottom panel screws.
Refitting the Drawer
To refit the drawer, pull the side rails fully out (Fig.7-18).
Carefully move the drawer back between the rails and rest it
on the side rails.
At each side, hold the front of the drawer and pull the side
rail forward so that the clips click into position, holding the
drawer to the side rails (Fig.7-19).
Customer Care
Installer: Please complete your details in this Guide, inform
the user how to operate the cooker and hand oven the
instructions.
Thank you.
Make sure the inner
rail is forwards
Fig.7-17
Fig.7-19
Fig.7-18
Front left
Front right
Summary of Contents for 1100 Dual Fuel
Page 1: ...1100 Dual Fuel USER GUIDE INSTALLATION INSTRUCTIONS ...
Page 4: ...ii ...
Page 34: ...30 ...
