MerCruiser 8.1 H.O. User Manual Download Page 81

Page: 81 / 106

Section 5 - Maintenance

90-899883273 MARCH 2008

Page 73

Serpentine Drive Belt

Belt Routing

WARNING

Inspecting the belts with the engine running may cause serious injury or death. Turn off

the engine and remove the ignition key before inspecting the belts.

8119

a -

Idler pulley

b -

Water circulating pump pulley

c -

Crankshaft pulley

d -

Alternator pulley

e -

Seawater pump pulley

f -

Tensioner pulley

Checking

Inspect the drive belt for:
• Proper belt tension deflection
• Excessive wear
• Cracks
• Fraying
• Glazed surfaces
• Proper tension
Use moderate thumb pressure on the belt at the location with the longest distance between

two pulleys.

Description
Deflection

13 mm (1/2 in.)

NOTE: Minor, transverse cracks (across the belt width) may be acceptable. Longitudinal

cracks (in the direction of belt length) that join transverse cracks are not acceptable.

21062

Summary of Contents for 8.1 H.O.











































































































Search results

Summary of Contents for 8.1 H.O.

Reviews:

Related manuals for 8.1 H.O.

Brands by name

Popular brands

MerCruiser 8.1 H.O., User Manual

Search results

Summary of Contents for 8.1 H.O.

Reviews:

Related manuals for 8.1 H.O.

Brands by name

Popular brands