mcr-PROLIGHT
VENTS
,
TYPE
:
C,
E,
NG-A
O
PERATION AND MAINTENANCE MANUAL
Page 26 of 31
9. INSTALLATION OF CONTROL DELIVERED SEPARATELY
If the control system is delivered separately, perform the installation as shown below.
A. Place the control system in the axis of the smoke vent.
B. Fix the control system to the vent base
using 12x steel screws dia. 6.3
C. Connect the actuator to the hook console
fixed to the vent leaf. To do so, remove
the pin and place the mandrel through
the actuator eye bolt, and through two
nylon sleeves
D. Then, depending on the control type, connect the assembly to the installation, as
shown on point 9, and then perform adjustment as shown on point 8.
Control system
Smoke vent
