Cellicon
TM
Perfusion Solution for Process Development User Guide
15
Choose Pump Behavior on Flow Error
Speed Control
These define the parameters which take
effect when the system is running in speed
setpoint mode. Speed setpoint mode is
activated by moving the toggle on the main
screen to show
Speed Setpoint
highlighted
by a dark grey box.
The minimum and maximum speed define
the range of pump RPM that the system
will allow. These settings take effect while
running in speed setpoint mode. The pump
speed ramp defines the rate of change when
a new setpoint is selected.
The
out of tolerance
alert will be activated when
the actual speed does not reach the setpoint
within the time defined in
Out of tolerance alert
delay
. The
out of tolerance
notification can be
activated under Settings
Alerts
General
Out-of-Setpoint Tolerance Alerts.
External Interfaces
Settings
• LAN Accessibility
• Remote Control by PLC
• PLC Analog Input
• PLC Digital Input
• PLC Analog Output
User Accounts Settings
The administrator can generate, delete
and edit user accounts, including password
protection capabilities and rescrict access
permissions.
The administrator can define up to six
user accounts. After selecting the
+ Add
new user
button, enter a username and
password, then press
Set permissions
. The
following permissions can be activated or
deactivated:
• Controller control – User can start/stop
the pump, change the setpoint, zero
adjust, and view priming instructions.
• Settings access – User can adjust all
settings.
• Data log access – User can turn on/off
data logging.
Create a New User
Set Permissions for New User
The active user can be changed by selecting
the user account icon in the top right region
of the screen and selecting
Switch user
.
When the screen is locked, any user account
can be selected to access the controller.
Only the administrator can change
permissions for each user, but users can
change their password when signed into their
account.
User Accounts Settings from a Non-
administrator Account
Access Denied Due to User Permissions
