It is ESSENTIAL that you apply wood
treatment immediately after the building
has been assembled.
AFTER TREATMENT:
score around protective
cover on glazing and
carefuly peel
covering back
P7
Please retain product label and instructions for future reference
Step 14
Remove film from both sides of the door
styrene before fitting the window bars.
Place one piece of beading (
No. 26
)
in the top groove and push into the top left
corner. Repeat with a second piece of short
beading and fit into the bottom right corner
of the lower groove. Place the Window Bar B
(
No. 19
) onto the Window Bar A (
No. 18
).
Fit the Window bars into the top and bottom
groove by using a circular motion. The bar
must be central.
Place the remaining beading (
No. 27
) into
the grooves and secure using 30mm screws.
You may want to place a piece of card on
top of the styrene to help avoid any
potential scratching.
14x30mm screws.
Pre drill
hole
30mm
screw
Beading
Beading
26
26
18
19
27
27
27
27
26
26