P 5
Please retain product label and instructions for future reference
7
9
9
10
10
7
11
11
Step 3
(See Pre-Assembly)
Parts needed - No. 7 QTY 4
No. 11 QTY 8
No. 12 QTY 8
Following the same method
outlined in
Pre-Assembly
, lay the
first 6 boards (
No’s. 7, 11 & 12)
onto the starter boards to
create your first level.
*Ensure that the boards are
level and flush with each other
as you lay each one.
IMPORTANT:
Pre-drill before fixing screws.
Step 4
Once you have laid 6 log boards (
off
of the starter
) up the door section,
slide the assembled door frame
(No.
2)
assembly over the boards resting
the frame on top of the starter board.
*Please note:
This image is for
illustrative purposes and may differ
from your choice in product (
regard-
ing door position
). Nevertheless the
process of fitting the door frame is
the same.
**Please Note:
The short boards at
the
front of the building (either side of
the door and window opening’s) can
be placed either side depending on
your needs.
Step 5
(See Pre-Assembly)
Parts needed - No. 5 QTY 14
No. 6 QTY 14
No. 7 QTY 7
No. 8 QTY 14
No. 9 QTY 14
Following the same method
outlined in
Pre-Assembly
, lay
the next 6 boards (
No’s. 5, 6, 7,
8 & 9
) onto the assembly to
create your second level.
*Ensure that the boards are
level and flush with each
other as you lay each one.
*Doors can be hung once the
boarding has enclosed the
door frame by 12-13 boards,
refer to door installation
instructions, if not, you can
install the door at step 7.
IMPORTANT:
Pre-drill before fixing screws.
5
6
6
5
8
8