P 7
Please retain product label and instructions for future reference
Step 6
Once you have laid 6 log boards (
off
of the starter
) up the door section,
slide the assembled door frame (No.
2) over the boards resting the frame
on top of the starter board.
*Please note:
This image is for illustra-
tive purposes and may differ from
your choice in product (
regarding
door position
). Nevertheless the
process of fitting the door frame is
the same.
22
22
Step 9
(See Pre-Assembly)
Parts needed - No. 4 QTY 6
No. 5 QTY 6
No. 10 QTY 12
No. 11 QTY 6
No. 12 QTY 6
No. 22 QTY 12
Following the same method
outlined in
Pre-Assembly
, lay
the remaining boards (No’s. 4, 5,
10, 11, 12 & 22) onto the
assembly to bring the board
level to the top of the window
and door frames.
Please note when you get to the
top of the boards the rear-right
hand boards will be slightly
lower.
**Ensure that the boards are
level and flush with each
other as you lay each one.
*Doors can be hung once the
boarding has enclosed the door
frame.
Step 7
(See Pre-Assembly)
Parts needed - No. 4 QTY 6
No. 5 QTY 6
No. 10 QTY 12
No. 11 QTY 6
No. 12 QTY 6
No. 22 QTY 12
Following the same method
outlined in
Pre-Assembly
, lay
the next 6 boards (No’s. 4, 5, 10,
11, 12 & 22) onto the
assembly to create your second
level.
*Ensure that the boards are
level and flush with each
other as you lay each one.
*Doors can be hung once the
boarding has enclosed the door
frame by 12-13 boards, refer to
door installation instructions, if
not, you can install the door at
step 9.
Step 8
Once you have laid the second
level of boards onto the assembly
slide the window(
s
) (No. 1) between the
smaller boards and rest on to the
longer board.
*Ensure the boards are level with
each end.
*Please note:
This image is for
illustrative purposes and may
differ from your choice in product
(
regarding window position
).
Nevertheless the process of fitting
the window is the same.
5
4
10
10
11
22
22
5
4
10
10
12
11
12
