6
P 5
Please retain product label and instructions for future reference
24
9
10
Step 6
First position the roof support bar
in the centre of the building
between the back corner and the
and the door panel.
Ensure the top
of the roof support bar runs level
with building. Line the support
block with the roof support &
mark its position. Secure the
roof block in place using 4x40mm
screws. Screw through boards into
the block from the outside.
Secure the front to the door
panel using the “L” Bracket and
4x30mm Screws
4x30mm Screws
4x40mm Screws
30mm
screw
Pre drill
hole
40mm
screw
Step 8
Place the roof section on top of
the building, ensure the roof
framing slots over each side.
Fix the roof panel into position
using 40mm screws making
sure to line the screws with the
framing inside the building and
along the internal length of the
roof suuport bar.
* It is recommended to cut the
roof felt sheets before fixing
the roof to the building.
21x40mm Screws
40mm
screw
Pre drill
hole
Step 9
Secure the building to the
floor . Fix the panels onto
the floor using 50mm
screws in alignment with
the floor joists
20x50mm Screws
50mm
screw
Pre drill
hole
14
13
Step 7
Attaach the front and rear roof
framing to the roof as shown
in the illustration using 6x30mm
screws.
*Ensure to fix the framing the
opposite direction to th e
roof bearers.
6x40mm Screws
40mm
screw
Pre drill
hole
